The TERMO 200 DA system is intended for the production of lift-and-slide doors with an integrated fixed part.

TERMO 200 DA profile system with thermal break and wooden lining on the inside of the opening. The basic installation depth of the frame is 200 mm.

Thermal break is achieved with polyamide strips of 27 and 30 mm for the frame and 18.6 and 30 mm for the leaf. 
In order to further improve the thermal characteristics of the profile, profiled KSPS rods (extruded polystyrene – 0.035 W/m2K) are installed in the profile chambers and such profiles have the letter F. Sealing is done with EPDM gaskets.
The base of these doors is aluminum, and wood gives the interior a special note with its warmth. The interior wood paneling of the door can be replaced if desired without removing the door thanks to a specially designed PVC clip and groove.

The aluminum/wood combination has found excellent use in modern architecture. A large selection of types and colors of wood that can be used in construction give modern buildings an attractive appearance. Technical characteristics of the system:
– maximum wing weight: 330 kg
– air permeability: EN 12207 (class 4)
– waterproofness: EN 12208 (class 9A)
– wind resistance: EN 12210 (class C4)
– anti-burglary EN 1627
– Calculation of UV coefficient: DIN EN ISO 10077-2 (≥1.1 Wm²/K)